The Europlus Supports are the new generation of steel supports. This support belongs to D classes of supports, what means that independently from the length of the extract it can be able to raise the weight of 20 kN.

The Europlus support is so strong and resistant, that it fulfills additionally high requirements of the new European class B. This fact has a huge meaning for You: according to lengths of slide-in elements, the weight of charge can be raised about 50 % more that is to 30 kN, and this means every third support less. Thanks to this, that the Europlus of the class D has an endurance of class B support,You can save even 33% of supports, in the dependence on the kind of the construction. The Europlus is: greater distances, smaller input of material, time, labour and cost saving. The usage of Europlus is also possible as a Topec soffit ceiling. Then the acceptable load is much bigger.

The quality of the construction and the persistence of doing it decides about the long life of the product and his values. That is why the Europlus supports are made of the high-quality steel and firely galvanized. For the better protection the double layer of the zinc was used.The boards and welds are also perfectively and tightly galvanized.

The Europlus meet the standarad of German DIN 4424 and are accessible into 6 versions. Gradually for all heights between 1, 54 m and 4, 50 m.

For Your safety the 10 centimetre handle of the safety was used in supports, making impossible the pushing out of the internal pipe also at the oblique or ceiling position. Double-coil thread surrenders lightly to screwing, but even under the weight, it does not compress.