Panels and boards
Veneered boards
The veneered board is built on the basis of the board, veneered with the natural wooden coat. It appears in the natural tints of wood.
Standard dimensions /mm/: 1240 x 2490, 1240 x 2740;
Sorts of veneers: the oak, the beech, the alder, the birch, the pine, the ash, the mahogany and
exotic veneers:
The boards of the MDF, HDF, OSB type
The MDF boards are produced in 3 versions: MDF, LDF, HDF. These are the wood-based products , made as a result of wood-fibres pressing with the organic joining and hardening compounds in conditions of high-pressure and temperatures. It is a material with the homogeneous thickness and the raw material composition in the whole section, thanks to what it possesses the excellent mechanical processing in the process of sawing.
The use
MDF - the Medium Density Fibreboard – a medium-dense board from wood- fibres. It is a basic material to furniture production and articles of interiors finishing such as garnish strips, wall- panels, coffers and also to production of builder′s woodwork articles eg. door. Because of values, surfaces fit to refinings by covering them with thin melamine films , lacquering and sticking with the artificial and natural veneer.
On sale we possess the mdf boards with thicknesses 5, 6, 8, 10, 12, 16, 18, 19, 21, 25 andsizes 2800X2070, 2850X183, 2650X2070.
LDF - Light Density Fibreboard - this is the board from wood- fibres , being characterized by the diminished thickness. The LDF boards are assigned to production of floor panels used in dry rooms. They also determine the board baze material to production of skin-insulating boards..
HDF -- Hight Density Fibreboard - is the board from wood- fibres , being characterized by a large hardness and an elevated thickness. The HDF boards are intended to production of floor panels. They are also a material to HPL and CPL luminizing, the resinous papers and natural veneers. The products made on the basis of plates the HDF standard board are intended to the use in dry rooms.
OSB - Oriented Strand Boards (in the translation – the board with the oriented flat scobs) is a wood-based product, made as a result of rectangular flat scobs pressing, in conditions of the high-pressure and temperatures.
It is a modern constructional and finishing material, which spreads out widely, especially in the building of houses with the skeletal wooden and steel construction (so-called the Canadian system).